Tag Archive for: Audi

This is Ken Block’s Audi S1 Hoonitron
, , , , ,

This is Ken Block’s Audi S1 Hoonitron

This is Ken Block’s Audi S1 Hoonitron

It instantly brings back memories of the legendary Audi Sport quattro S1 with which the four rings used to charge to the summit in the famous Pikes Peak Hill Climb event, aka the “Race To The Clouds:” Audi is presenting the Audi S1 e-tron quattro Hoonitron that has been exclusively and uniquely developed for American drift artist Ken Block. The all-electric one-of-a-kind car will be the protagonist in a new video that Block is producing together with his team for release in the next few months.

This is Ken Block’s Audi S1 Hoonitron

This is Ken Block’s Audi S1 Hoonitron

“The S1 Hoonitron combines a lot of what Audi was already famous for in the nineteen-eighties,” says Ken Block, whose enthusiasm for Audi’s rally cars was sparked at an early age. “For instance, the car’s spectacular aerodynamics have now been translated into a totally modern form. I think it’s cool that the Audi designers have been inspired by their own past and uniquely transferred the car’s technologies and appearance into the present.” 

Two electric motors, all-wheel drive, power galore, a carbon fiber chassis, and the full safety standards as prescribed by motorsport’s top governing body, the FIA – these are merely the S1 Hoonitron’s statistics. In November, the driver got to know the car for the first time. “Audi gave me the opportunity to test it for a few days in Germany,” says Ken Block.

This is Ken Block’s Audi S1 Hoonitron

This is Ken Block’s Audi S1 Hoonitron

“I’m familiar with a wide variety of cars using internal combustion engines and transmissions, but there were a lot of new things for me to learn here. Spinning into a donut at 150 km/h directly from standstill – just using my right foot – is an all-new experience for me. Our work was focused on getting the car and I used to each other. My thanks go to the whole Audi Sport squad for their outstanding teamwork.”

This is Ken Block’s Audi S1 Hoonitron

This is Ken Block’s Audi S1 Hoonitron

The entire development, including the technology, of the S1 Hoonitron was conducted by Audi Sport at the Neckarsulm location – a perfect fit for the project, because that’s also where the Audi RS e-tron GT1 is produced. Audi Design in Ingolstadt was responsible for the styling, which has been anything but a run-of-the-mill job for Marc Lichte and his team. “When we first heard about this project, the whole team was thrilled immediately: we had the opportunity to develop a car that combines an icon of our brand with the future,” says Audi’s chief designer. The challenges were tremendous: “It was about creating a modern, all-electric interpretation of the S1 Pikes Peak. The timeline was extremely tight: while our design process normally takes one to one-and-a-half years, we only had four weeks from the first drawing to the final design. We were constantly in touch with Ken Block and his team and engaged in intensive exchanges.”

This is Ken Block’s Audi S1 Hoonitron
This is Ken Block’s Audi S1 Hoonitron
This is Ken Block’s Audi S1 Hoonitron
This is Ken Block’s Audi S1 Hoonitron

Fans will soon be able to see the US star’s success with the project for themselves: under the working title Elektrikhana, Ken Block and his team are going to produce the next video of his famous Gymkhana series featuring the S1 Hoonitron. “The collaboration with Audi is a very special partnership for me. The brand and its passion for motorsport motivated me to get into rallying,” says Ken Block. “That Audi has now developed this car for me and my team, and has joined us in our next project, has made a dream come true for me. The Hoonitron is writing the next chapter in our history and taking our Gymkhana story into the future.”

This is Ken Block’s Audi S1 Hoonitron

This is Ken Block’s Audi S1 Hoonitron

A story of the future that everyone at Audi is also looking forward to: “Knowing that we’re developing a car for a video with Ken Block that millions of people around the world are going to watch has provided our team with additional motivation,” says Marc Lichte. “These new inspirations are also immensely important for our daily work. The development of this car will encourage us to approach future projects with an even more open and progressive mindset.”

/by
, , , ,

Audi grandsphere concept – First class toward the future

Audi grandsphere concept

First class toward the future

The private jet for the road – At the IAA 2021, Audi is presenting the Audi grandsphere concept study. Like a first class flight, the 5.35 m (17.6 ft.) long grandsphere sedan combines the luxury of private travel in the greatest of comfort with a comprehensive onboard experience offering.

Level 4 automated driving makes new dimensions of freedom possible: in this mode, the interior turns into a spacious sphere of experience without a steering wheel, pedals, or displays. And the front seats become a first class lounge with maximum space, freer views, and access to all the functions of a holistic digital ecosystem that the Audi grandsphere is integrated into.

As the second of three “sphere” concept cars from the brand with the four rings, the Audi grandsphere has a special place. That is because the technologies and design features assembled in it will turn up again within a few years in future Audi series. The Audi grandsphere concept illustrates the brand’s claim that it is becoming the trendsetter at the top of the automotive industry for technological transformation and completely new, holistic mobility offerings.

The electrically driven roadster Audi skysphere concept debuted in August 2021 – it was a spectacular vision of an automatically driving GT that transforms into a self-driving sports car with a variable wheelbase. These two concept cars – as well as the Audi urbansphere, which will appear as the third part of the trio in 2022 – are linked by their overall concept, which is derived from their ability to drive automatically at level 4. Audi is working with CARIAD, the Volkswagen Group’s software think tank, toward introducing that technology in the second half of the decade.

Level 4: not only does it change the interior space of the traditional driver-oriented cockpit and passenger seats into a spacious lounge as soon as the steering wheel and pedals are reduced. At the same time, it opens up new levels of freedom for all the passengers. That is because the Audi grandsphere not only frees the driver from the tasks of driving whenever possible, but at the same time also offers everyone onboard a wide range of options to use that freedom for individually variable experiences: communication or relaxation, work or withdrawal into a private sphere as desired. The Audi grandsphere concept transforms from being strictly an automobile in an “experience device.“

Thanks to Audi’s own services and the ability to integrate digital services, the possibilities are nearly endless. These can be used to access a variety of service options related to the current trip – such as designing a spectacular scenic route, as well as restaurant or hotel options. The vehicle also takes care of everyday tasks that go beyond the ride itself. For example, the autonomous Audi grandsphere concept picks up its passengers with information about their current destination and independently handles parking and charging.

Customized infotainment options are also available, such as seamless integration of onboard streaming from music and video providers that have been used previously. In an additional step, Audi will keep personalized and exclusive options available in the future – concerts, cultural events, or even sporting events that customers are invited to.

The Audi grandsphere concept illustrates the brand’s claim that it defines the progressive luxury of the future: for Audi, that includes the option of new high-class experiences, enabled by digitalization, as well as a holistic approach to sustainability with the goal of carbon neutrality in the near future along the entire value chain.

First class for the future times three

Audi skysphere, Audi grandsphere, and Audi urbansphere are the three concept cars that the brand with the four rings is using to showcase its vision of progressive luxury. In the process, Audi is creating a vehicle experience that goes far beyond the purpose of merely spending time in a car to get from point A to point B, and even far beyond the driving experience itself.

These concept cars feature a new design that ultimately reimagines the interior, the passenger compartment, as the center of the vehicle and no longer subordinates the passenger experience to the requirements of the technology. This is reflected in the variable layout of the interior, the disappearance of the controls, and the sheer expanse of the cabin, in addition to linking them to new service offerings.

The design process – from the inside out

Even the “sphere” in the name sends a signal: the heart of the Audi skysphere, grandsphere, and urbansphere concept vehicles is always the interior. The drive system and the handling are no longer at the top of the design specifications in this new generation of cars. Instead, the starting point is the interior, the occupants’ living and experience sphere while traveling. Their needs and desires shape the space, the architecture, and the functions. With that reassessment, the design process itself changes. At the beginning of all discussions, the focus is directed toward the interior and its design. Only after that do we design the package, exterior lines, and proportions that shape the car into a total work of art, along with the technological premises.

Space, form, function – the interior

The doors of the Audi grandsphere concept are reversed so front and back touch; there is no B-pillar. The whole world of the interior opens up to passengers as soon as they climb in. But even before that, the Audi grandsphere has identified its passengers with a pathway identification – an innovative feature – that opens the doors and welcomes them with individually staged displays and ambient light. The driver and passenger positions are automatically detected and an array of personal comfort features – such as the climate control settings and the seats – are adjusted for the individual seats. At the same time, the infotainment system accesses the passengers’ most recently used services and seamlessly resumes them inside the car. For instance, a video that a passenger was streaming on a tablet is automatically played back over the display surface in the Audi grandsphere. On the driver’s side, on the other hand, the projection surface automatically picks up on displaying the news the occupant was reading before getting in.

In the interior, the lines on the decorative surfaces and functional elements are emphatically horizontal. The open, broad interior supports the impression of a unique space and the lack of a steering wheel, pedals, or conventional dashboard create a feeling of openness and breadth.

The large glass surfaces, expansive windshield, and transparent ceiling also emphasize that feeling. The same goes for the particular geometry of the side windows: their upper half is distinctively angled – the widest part is just slightly above eye level. It is a trick that Audi demonstrated for the first time in 2017 with its futuristic AI:CON concept car and which is now moving toward series production.

The change in the comfort zone is radical: if the boss’ seat is in the back in a conventional sedan, first class has now shifted forward into the front row. That is because it is no longer necessarily subordinated, first and foremost, to the driving function and the controls. In level 4 driving, the steering wheel and pedals disappear and the front area of the cabin becomes actual free space in all its breadth, with a perfect view through the large front and side windows, as well as maximum possibilities for movement.

The interior appears particularly wide when the two individual front seats are pushed all the way back. The Audi grandsphere is a 2+2-seater. An upholstered, two-person bench with an armrest that goes around the side is integrated as a seating option in the back, while both front seats are designed for first class comfort and space.

The seating surfaces and backs of the two seats with integrated belts are visually separate. The side bolsters of the seat backs are discreetly bent, thereby ensuring support while driving through curves. The possible seat positions are optimized for every use: in the upright position, the Audi grandsphere can be perfectly ergonomically controlled – as desired and outside level 4 zones. With the back tilted 40 degrees, passengers can relax and use the infotainment system. Finally, if the back is folded out to 60 degrees, it achieves a perfect resting position. The headrest can be bent 15 degrees forward. Outlets for air that is filtered and temperature controlled – even scented, as desired – as well as speakers that are inaudible to other passengers and allow for a private aural zone are all integrated into this area.

Between the front seats – normally concealed under metallic trim – there is a compact, onboard cooler with two glasses and a designed, elegant bottle for soft drinks. This is another sign of the Audi grandsphere concept’s first class claim.

No fittings, no screens: displays and operation

One surprise when looking around in the Audi grandsphere’s natural-colored, reduced-design interior: neither batteries of dial instruments nor black screens for virtual display concepts are visible before activating the driving functions – the oft-cited digital detox at its finest.

Instead, there are clearly articulated and sedate areas with materials of the highest quality. Wood and wool, synthetic textile fabrics and metal are visible and pleasant to touch as wall cladding, seat covering, and carpeting. Many of these materials, like the hornbeam veneers, come from sustainable cultivation or are made from recycled raw materials. There is no leather in the Audi grandsphere – even this is in keeping with a progressive understanding of luxury, which is always inseparable from sustainability.

Another surprise whenever the vehicle comes to life at the touch of a fingertip: there are displays – but they take the form of projections on the wooden surfaces under the windshield. Depending on the driving status – whether manual with a steering wheel or level 4 – they are either distributed across the entire width of the interior or segmented for the driver and front seat passenger. All the information that is necessary while traveling is there in high resolution and precisely readable.

Alternatively, the projection surfaces can also be used – in automated driving mode – as CinemaScope screens for infotainment content or even as screens for video conferences. In addition, a sensor bar is integrated under the projection surfaces for quick switching between content – for instance, for music or navigation. It shows all the functions and applications that are active in the car. Icons flash for the different menus.

One particular, extremely innovative control element is located near the door cut-out on the interior cladding: the MMI touchless response. If the driver is sitting in the active position behind the steering wheel, far toward the front in the interior, he or she can use that control to haptically select various function menus via a rotary ring and buttons and click through the different levels. A simple, intuitive operation.

If, on the other hand, the driver reclines the seat far to the back during level 4 driving, he or she does not have to do without these comfort items. That is because, at that point, a combination of eye tracking and gesture control are used. A sensor directed at the eye detects the line of sight when the control unit is to be engaged. And the passenger only needs to make analogous hand motions – without leaning over – that are similar to haptic operation and can use the system just as well that way – without touching a thing.

Whether it is eye tracking, gesture or voice control, handwritten input, or touch, the same thing applies to all operation modes: the Audi grandsphere concept adjusts to the individual user and learns his or her preferences and frequently used menus – and on that basis it can not only sensibly complete rudimentary commands, but also give personal proposals directly to the user.

Control panels are even integrated into the armrests on the doors. That way, the car always offers passengers invisible touch surfaces using an optic indicator to show its position. At the same time, there are VR glasses in the armrests on the left and right doors that can be used in conjunction with infotainment options – for instance for the holoride system.

Dynamic monolith – the exterior design

At 5.35 m (17.6 ft.) long, 2 m (6.6 ft.) wide, and 1.39 m (4.6 ft.) high, the Audi grandsphere concept’s measurements reveal this sedan as an unambiguous example of the luxury class automobile. The 3.19 m (10.5 ft.) wheelbase indicates top value, which even overshadows the long version of the current Audi A8. But even more striking than what these figures suggest is the visual impression that it makes upon seeing it for the first time. That is because the Audi grandsphere looks nothing like a traditional sedan, but rather more like a tightly drawn four-door GT with a line the comes straight from the wind tunnel. And it does that while doing without any decor or superfluous flourishes.

In the process, the Audi grandsphere consistently implements the specific conditions of the electric drive system right in the front end – a short overhang, a flat hood, and the windshield that projects far forward as the foremost limit of the large interior. Nonetheless, unlike many electric cars, it does not look futuristic at all, but rather emphasizes traditional beauty ideals. The top edge of the hood is drawn far into the side of the chassis in a horizontal line, suggesting a long engine compartment – all characteristics of a GT. In the rear, that line continues at the same height across the rear wheel well, encompassing the whole cabin and emphasizing its size.

A second horizontal line emanates from the bottom edge of the hood and runs under the side windows and likewise around the entire cabin. This subdivides the door surfaces into horizontally oriented shoulders and the convex verticals below them above the rocker panel. The wheel wells have a soft, yet distinctive shape – typical Audi. The slender rear behind the massive C-pillar is a quote from traditional streamlining. And the dynamically sloping arc of the roofline reveals the grandsphere as part of the Audi Sportback tradition. All lines and all surfaces seem to organically correlate, combining to form one monolithic body.

At 23 inches, the wheels of the Audi grandsphere concept quote an icon from the 1990s – the Audi Avus. At the same time, the six double spokes signal light construction and stability, recalling functional motorsport wheels and the Bauhaus tradition in brand design.

Visible technology – light

In the front end, there is an innovative interpretation of the Singleframe that defines Audi’s look: it is shaped like a flat hexagon. The interior surfaces, behind a transparent covering, are indirectly lit from above while driving – a distinctive, extremely three-dimensionally structured visual effect.

The headlight units on the upper side of the Singleframe look narrow, like focused eyes. The lighting units reference the four rings brand logo: they enlarge and isolate the intersection of two rings into a pupil – a new, unmistakable digital light signature. This means that the size of the light areas can be adjusted according to their function as daytime running lights or as dynamically staged blinkers – depending on the traffic situation – and thereby issue an obvious signal in the interest of safety. The same graphic is also in the rear lighting units – another significant characteristic of the Audi light design.

Drive system and charging

The technology platform of the Audi grandsphere – what is known as the Premium Platform Electric, or PPE – was conceived exclusively for battery-powered electric drive systems and therefore it takes full advantage of that technology. The key element of PPE is a battery module between the axles that holds around 120 kWh of energy in the grandsphere concept. A flat battery layout is possible because Audi uses the entire vehicle base between the axes.

Together with the large wheels, this produces basic proportions that are perfect not only from a design perspective. The core benefits include a long interior and therefore legroom in both rows of seats. Additionally, the absence of a gearbox cover and a cardan tunnel increases spatial comfort in electric cars.

Nonetheless, the Audi grandsphere does not forego the quattro drive system, which is essential to the brand. That is because the concept car has separate electric motors mounted on the front and rear axles that use electronic coordination to deliver all-wheel drive on demand and execute a perfect balance between driving dynamics and energy efficiency. The Audi grandsphere concept’s two electric motors are capable of delivering a total output of 530 kW and a torque of 960 Newton meters.

Fast charging, high range

The heart of the drive system is the 800 volt charging technology. Like the Audi e-tron GT before it, this technology ensures that the battery can be charged with up to 270 kW in a very short time at fast-charging stations.

This strategy makes charging times that approach a refueling stop for a car with a conventional engine possible. Just ten minutes are enough to charge the battery to a level sufficient to power the car more than 300 kilometers (186 miles). In less than 25 minutes, you can charge the 120 kWh battery from 5 to 80 percent.

Together with a range of more than 750 kilometers (466 miles) – depending on the selected drive system and power output – the Audi grandsphere concept is unconditionally suitable for long distances. Furthermore, its range and charging speed keep pace with those of combustion engines, making it the perfect universal car for everyday needs.

In terms of dynamic qualities, the Audi grandsphere concept – as is typical for an electric car – truly outshines its rivals with combustion engines. Thanks to the high torque that is available from the first revolution, acceleration from 0-100 km/h (62 mph) takes just over four seconds; maximum speed is limited in the interest of increased range.

Air suspension and active suspension for maximum comfort

The front wheels are connected via a five-link axle, specially optimized for electric vehicles. In the rear, there is a multi-link axle that, like the front, is made of aluminum. Despite the long wheelbase, the steerable rear wheels provide excellent maneuverability. The luxurious Audi grandsphere concept touring sedan utilizes Audi air suspension – a single chamber system with adaptive dampers. Quite well suited for dynamic driving when necessary it guarantees gentle comfort without noticeable vehicle body movements, under normal conditions.

The reason: the Audi grandsphere concept has active suspension. The high-tech system can separately pull up or push down on each wheel separately in milliseconds via electromechanical actuators. That makes it possible to actively control the state of the chassis in every driving situation and therefore significantly reduce pitching and plunging when accelerating or braking. Thanks to the front camera, which recognizes unevenness, the adjustments happen predictively. The navigation system’s topographical data are also used to integrate curve radii, gradients, and inclines into the system’s projection.

/by
, , , , ,

Audi skysphere concept – The future is wide open 2021

Audi skysphere concept (2021)

Audi has unveiled the first member of a new family of concept vehicles, a spectacular roadster. Audi skysphere concept is the name of the electric-powered, two-door convertible whose lines lead directly to the Audi design of tomorrow. With it, the brand is illustrating its vision for the progressive luxury segment of the future, in which the interior becomes an interactive space and the vehicle a platform for captivating experiences. This is being made possible thanks to autonomous driving, a revolutionary redesign of the interior, and a seamless digital ecosystem.

The Audi skysphere concept shows how the brand is redefining luxury in the future – it’s no longer just about driving. The concept car was designed with the clear objective of offering its occupants captivating and world-class experiences.

Static photo,
Colour: Stage Light

To give passengers the maximum amount of freedom, the Audi skysphere concept was designed for two different driving experiences: a grand touring experience and a sports experience. This makes use of a spectacular technical detail – the variable wheelbase. Electric motors and a sophisticated mechanism with body and frame components that slide into one another make it possible to vary the wheelbase itself and the exterior length of the car by 250 millimeters. At the same time, the vehicle’s ground clearance is adjusted by 10 millimeters to enhance comfort and driving dynamics.

With the touch of button, the driver can take advantage of their freedom and choose their own driving experience– either they pilot their 4.94-meter-long e-roadster themselves in “Sports” mode with a reduced wheelbase, while the rear-wheel steering ensures that the vehicle remains extremely agile despite its dimensions. Or they can choose to be chauffeured around in a 5.19-meter GT in the autonomous “Grand Touring” driving mode while enjoying the sky and the scenery, maximum legroom, and the services offered by a seamlessly integrated digital ecosystem.

In this mode, the steering wheel and pedals move into an invisible area; the feeling of space in the concept car opens up completely new realms of possibility for such a sporty convertible. Meanwhile, the Audi skysphere automatically keeps an eye on the road and traffic with its sensor system and drives the occupants safely to their destination.

Static photo,
Colour: Stage Light

Similar to how the interior design offers a new, contemporary interpretation of luxury, digitization and the ecosystem open up unprecedented levels of freedom and worlds of experience for the vehicle’s passengers. Thanks to Audi’s own services and the ability to integrate digital services, the possibilities are nearly endless. In addition, the passengers can share their experience on the road with friends via social media, with images of the interior and the surrounding area. The vehicle also takes care of everyday tasks that go beyond the ride itself. For example, the autonomous Audi skysphere concept picks up its passengers with information about their current destination and independently handles parking and charging.

Static photo,
Colour: Stage Light

Audi skysphere to be unveiled on its home turf in California

The Audi skysphere concept will make its public debut on August 13, 2021, as part of Monterey Car Week – on the legendary fairways of the Pebble Beach golf course. This means the vehicle’s unveiling in California is taking place more or less on its home turf. This is because the concept car was conceived and designed at the Audi Design Studio in Malibu, just a stone’s throw away from the Pacific Coast Highway, the legendary coastal road that connects the suburbs of Los Angeles with northern California. Studio manager Gael Buzyn and his team are the creative minds behind the project. A legendary classic model from the company’s own history – the Horch 853 roadster – served as the inspiration for the new groundbreaking model. The impressive convertible, which is also around 5.20 meters in length, was not only the definition of modern luxury in the 1930s, but also won the Concours d’Elegance in Pebble Beach in 2009.

But the visual inspiration from its predecessor is limited to the concept car’s dimensions and typical proportions with a rather compact cabin and long front end. A look under the hood of the Horch reveals an imposing straight-eight engine with a displacement of 5 liters. The Audi skysphere, on the other hand, mainly has electric drive components between the front axle and the windshield, such as the charger and the DC/DC converter, plus the actuators and electronic and mechanical components for the adaptive wheelbase. It also features a spacious trunk filled with two golf bags specially designed for the concept car.

Static photo,
Colour: Stage Light

The drive system: 465 kW of power

“New technologies like electrification, digitalization, and autonomous driving gave us the opportunity to create an experience that goes way beyond the one that typical roadsters offer today,” said design project manager Gael Buzyn.

An electric motor positioned on the powered rear axle is responsible for delivering power to the wheels of the Audi skysphere. A total of 465 kilowatts of power and 750 Newton meters of torque have an easy time with the roadster, which only weighs around 1,800 kilograms. The weight distribution of around 60 percent on the powered rear axle results in ample traction and acceleration from 0 to 100 km/h in just four seconds, if required.

The Audi skysphere’s battery modules are primarily positioned behind the cabin – an ideal configuration for the vehicle’s center of gravity and agility. Further modules can be found between the seats in the center tunnel of the skysphere interior – another position chosen in favor of vehicle dynamics. The battery’s capacity is expected to be more than 80 kWh, giving the car a range of more than 500 kilometers according to the WLTP standard, at least in the economical GT mode.

Static photo,
Colour: Stage Light

The chassis: rear-wheel steering and adaptive air suspension

The vehicle features double wishbone axles in the front and the rear. The upper and lower wishbones are forged or cast from aluminum. Steering takes place via a steer-by-wire system that controls both the front and the rear wheels. Because the system is not mechanically connected to the front axle, the driver can select different steering ratios and steering settings – all at the touch of a button. This allows the steering to be adjusted from extremely direct to comfortable, but also from high self-aligning forces to minimal self-aligning forces, for example when parking. The rear-axle steering and adaptive wheelbase also contribute to the car’s small turning radius.

A long-established Audi chassis technology ensures that the suspension delivers the necessary level of versatility – the latest evolutionary stage of Audi’s adaptive air suspension has been implemented in the concept car and features three independent air chambers to provide a comfortable base suspension. Individual chambers can be deactivated for a more sporty ride with fast acceleration. The result is that the characteristic curve of the spring becomes more progressive, reducing roll and pitch to a minimum. Lowering the body by 10 mm reduces aerodynamic drag – particularly relevant when driving long distances.

The Audi skysphere’s active suspension plays a key role in the versatility of the car’s handling characteristics. When simply coasting along, the individual wheels are selectively raised or lowered to compensate for unevenness and undulations in the road surface – the result of a symbiosis between the navigation system’s digital predictions and the active chassis’ sophisticated control and actuation systems. Mounted on aerodynamically styled 23-inch alloy rims, the 285/30 tires strike a perfect balance between suitability for long-distance trips thanks to minimal rolling resistance and a sporty, active driving style with high longitudinal and lateral acceleration.

Design Sketch

The exterior: reverence without retro

When it comes to their footprint – 5.23 meters in length versus 5.19; a width of 1.85 versus 2.00 meters – it is easy to see the similarity between the legendary Horch 853 convertible and the Audi skysphere. A striking difference, on the other hand, can be found in their height – the legendary Horch, with its iconic design, towered up to 1.77 meters depending on the body shape, while its autonomous descendant, the Audi skysphere, ducks down to the road in Sport mode at 1.23 meters flat, with an optimized center of gravity and aerodynamics. The concept car pays its respects to the classic model without merely remaining a retro imitation.

After all, apart from its dimensions, it’s the lines that make a real difference. With its wide curved and flared wheel arches typical of the brand, the skysphere emphasizes the wide track – a visible indication of its dynamic talents. Viewed from the side, the proportions are impressive with a long hood and – especially at the front – a short overhang. The surfaces of the wheel arches and front hood are organically curved. The rear end was developed in a wind tunnel and combines elements of a speedster and a shooting brake with large glass surfaces in a traditional streamlined design. Two overnight bags designed specifically for the Audi skysphere find space under the glass, and are held in place with straps that are stretched in a crosswise pattern.

The front end – although no longer serving as a radiator grill – clearly features the brand’s typical Singleframe and the three-dimensionally designed, illuminated emblem with the four rings. The entire Singleframe and also the adjacent surfaces on the sides are designed with white LED elements to literally act as a stage for visual effects – both functional effects as well as moving welcome sequences when the vehicle is opened and closed.

Detail

Gentle dimming and a structured, rhythmically pulsating light produce an elegant effect. The daytime running lights in the side front sections, in turn, give the lighting units a resolute, focused “gaze.” If the wheelbase is changed, the LEDs in the front and rear display a specially composed dynamic sequence.

The rear end is also dominated by a digitally controlled LED surface that extends across the entire width of the vehicle. Countless red LEDs are scattered like rubies across the vertical rear surface. Reflections create dynamic lighting and shadow effects when the lighting units are switched on and off.

Upon changing the wheelbase and thus the operating mode from GT to Sport, the light signature also changes and sends a clear indication of the changed character of the Audi skysphere concept, particularly in the area around the Singleframe.

A characteristic feature of the side view are the rocker panels, which seem to protrude into the rear wheel arch – a necessary feature when varying the wheelbase actually pushes it backwards. The rocker panel is attached to the front end of the car, and as it moves, the panel also slides to the rear under the fixed door. In the process, the wheelbase is reduced from the standard size of an A8 L to the significantly more compact size of the curve-compatible Audi RS 5 – 25 centimeters make all the difference. And not just technically, but also visually and, above all, in terms of the driving experience.

There’s no doubt that the Audi skysphere concept has two personalities – a GT and a luxury sports car. The key differences, however, can only be enjoyed in the interior, because here, behind the rear-hinged and wide-opening doors, the Audi skysphere offers highly contrasting experiences.

The interior: two spheres of experience in one

When it comes to the three upcoming concept cars Audi skysphere, Audi grandsphere, and Audi urbansphere, the brand is placing the space that surrounds the passengers (“sphere”) and which becomes an experience for them – the interior – at the center of its designs. This is because all three vehicles are designed for level 4 autonomous driving – meaning that in certain defined road and traffic situations, the driver can delegate complete responsibility to the car and no longer has to intervene.

As a result, control elements such as the steering wheel and pedals can be swiveled into an invisible position and thereby completely removed from the interior. And passengers, including the one in the front left seat, can enjoy a new form of freedom – the freedom to relax in the open air, enjoy the scenery and the wind, or interact with the Internet and the world thanks to the connection with the digital ecosystem in the Audi skysphere.

Free of controls, the interior appears as a light, spacious environment, inspired in many areas by the Art Deco universe. The comfortable seats boast the visual elegance of designer furnishings, yet they fulfill the functions of an car seat in driving mode without any compromises – side support and safety features are part of the package. They are upholstered in sustainably produced microfiber fabric and, thanks to their variable position in the interior, offer the kind of freedom to move and legroom that can otherwise only be experienced when flying first class on an airplane. Environmentally certified eucalyptus wood and synthetically produced imitation leather are other sustainably manufactured materials that contribute to creating an unparalleled experience in the vehicle’s interior.

Should the Audi skysphere concept be used in driver-operated mode, then the interior transforms into an ergonomically perfect driving machine cockpit. Together with the chassis and body, the instrument panel and the monitor panel on the center console also move to the rear. The driver finds all the controls, including the steering wheel and pedals, in the position that best suits them.

Large touch monitor surfaces – 1415 mm wide, 180 mm high – on the dashboard and in the upper area of the center console are used to operate the vehicle and infotainment systems. In Grand Touring mode, this can be used to display content from the Internet, video conferences, or streamed movies. Small touch panels in the doors are used to operate the air conditioning.

A high-quality sound system – befitting of this luxury convertible – delivers concert hall audio quality even when the vehicle is in motion. The speakers are hidden behind the door panels; a few more in the rear interior wall even produce surround sound. The shape of the headrests prevents turbulence and also annoying wind noise.

The vehicle experience: luxury without limits

Audi skysphere, Audi grandsphere, and, coming in 2022, Audi urbansphere are the three concept cars that the brand with the four rings is using to showcase its vision of progressive luxury. In the process, Audi is creating a vehicle experience that goes far beyond the purpose of merely spending time in a car to get from point A to point B, and even far beyond the driving experience itself.

These concept cars feature a new design that ultimately reimagines the interior, the passenger compartment, as the center of the vehicle and no longer subordinates the passenger experience to the requirements of the technology. This is reflected in the variable layout of the interior, the disappearance of the controls, and the sheer expanse of the cabin. In Grand Touring mode, this not only allows both passengers to enjoy a smooth and pleasant journey, but also combines it with new service offerings. These can be used to access a variety of service options related to the current trip – such as designing a spectacular scenic route, as well as restaurant or hotel options.

Customized infotainment options are also available, such as linking the on-board streaming service to music and video providers used at home. And in a further step, Audi also aims to provide personalized and exclusive options for users of its luxury cars in the future – such as concerts, cultural events, or even sporting events that are only available upon special invitation. In this way, a vehicle like the Audi skysphere concept will become a platform for experiences that expand horizons beyond the mere ride in just a few years.

/by
, , ,

The Audi e-tron S line black edition

Progressive and sporty into the new model year: The Audi e-tron S line black edition

A progressive, profoundly sporty exterior look with a black Singleframe and black side mirror caps, an interior with orange accents – Audi presents its fully electric SUV models e-tron2 and e-tron Sportback3 in the S line black edition. Presales just started in Germany and other European markets.

The S line black edition highlights the sporty nature of the fully electric Audi e-tron models. It builds on the S line exterior, which already features striking accents in the front, sides and rear. For the edition model, the Singleframe, as well as the four rings, the side mirror casings and the e-tron badges, are all in black. Audi Sport supplies the 21” wheels, also in black, contrasted by the orange brake calipers. The back seat has dark tinted windows, and the new, exclusive metallic finish color options Chronos gray, Glacier white and Mythos black are available. LED lights on the underside of the doors project the words “e-tron black edition” onto the street when the door is opened.

The package expands on the S line interior. The contrast stitching of the black sport seats (standard) and the armrests and seat belts stand out in orange. The center section of the seats and inlays of the doors are of the new Dinamica material – a breathable microfiber that is made of 45 percent recycled polyester such as PET bottles. For the truly discerning, fine Valcona leather is also available. The instrument panel is upholstered in leatherette with decorative carbon inlays.

The new S line black edition is available for the Audi e-tron2 and the Audi e-tron Sportback3 in both motorization levels. The Audi e-tron S line black edition 50 quattro4, whose two e-machines have an output of 230 kW (313 PS), is listed at 79,350 euros. The Audi e-tron S line black edition 55 quattro5 with 300 kW (408 PS) starts at 91,750 euros. The two corresponding sportback versions are each an additional 2,250 euros. With all edition models, customers receive a premium of 7,500 euros after taxes.

Audi e-tron and e-tron Sportback: New details for this popular model

Audi had a very successful start into the era of sustainable mobility with the e-tron2. In 2020, the e-SUV, together with the e-tron Sportback3, was the most widely sold electric model by a German premium manufacturer, with demand growing by almost 80 percent over the previous year. The Audi e-tron2 was the most widely sold car in the Norwegian market across all fuel types. The 100,000th e-tron was assembled in April.

The e-tron series will be even more attractive in the 2022 model year. The second integrated charger will be available for all versions and models, increasing performance for alternating current (AC) charging from 11 to 22 kW and significantly reducing charging times. For the exterior, the appearance package black plus is available with black rings and e-tronbadges; for the interior, Dinamica upholstery is now available across the board. The streaming service Apple Music is now available optionally as a new Audi connect service.

 

/by